Textile Industry

Login

No products in the cart.

Our Airgineers Can Help You Select The Right Product!

Textile Industry

Though you might not realise it, dry compressed air affects every unit in the Textile Industry.

Use of Compressed Air in the Textile Industry

In Textile manufacturing units, the following Compressed air powered pneumatic systems are used:

Spinning machine
Loom Jet Weaving
Stacking Device
Printing machines
Thread Detector
Sewing Machine

Applications

Texturising
Automated Equipment
Agitating Liquids
Cleaning
Pneumatic control and actuators
System Cooling
Clamping
Blowing out residual / dust material
Sewing Needle
Conveying

Problems

A major problem in compressed air systems is the presence of moisture/water, dust particles, oil (oil particles are introduced by lubricated air compressors), and solid contaminants, which can adversely affect air quality.

If the contaminated compressed air is used through pneumatic tools and machines, then there will be the following problems:

Malfunctioning of pneumatic tools and machines
Sluggish and inconsistent operation of valves and cylinder
Corrosion in pipelines, cylinders and other components
Increase in downtime
Increase in maintenance cost of pneumatic machines/tools/controls
Freezing in exposed lines during cold weather

Moisture in compressed air also leads to problems like low-quality printing in garments.

The Delair Solution

Remove moisture/water, dust particles, oil (lubricated air compressors introduce oil particles) and solid contaminants from compressed air.
Delair offers a wide range of refrigeration and adsorption dryers that remove water/moisture from compressed air.

Delair refrigeration dryers

This dryer operates on the method of cooling the air to near freezing point to remove the moisture and reheating it to approximately 10°C below the incoming compressed air temperature at nominal conditions.

Delair Adsorption dryer

The dryers are based on the principle of heatless regeneration and the physical properties of their desiccant to adsorb and desorb the water vapour; it use the pressure swing principle / purge air to regenerate the desiccant bed.